In mixing 101, developing an ear is more than just listening for certain instruments and voices, it is delving deeper into the actual frequencies. For instance, I do some mixing at a small church in Vancouver, and one of the speakers has a vocal frequency range that just wreaks havoc on us mixers. For whatever reason, his voice introduces frequences (or freqs) into the system that cause feedback at much lower levels than anyone else. For months, we tried our best to change EQ (equalization) settings to dial out those freqs, but to no avail. We finally discovered that all the changes we were making on our master system EQ were to the wrong side (left instead of right). Once we began to change the freqs in the right side of the system EQ, we were able to finally master his voice and crank the volume to where it needed to be.
But we never would have been able to do that if we didn’t have an ear for which frequencies should be addressed first. You see, a lot of church sound operators never took the time (or had the training) to dig into what they are doing. They know the basics of how to turn the system on, how to put the faders up and down, and how to mute. A bit more advanced operators will understand how to use EQ and how to route channels to the auxiliary outputs (or auxes). But a lot will stop there, and for good reason—what’s the point of learning more than what you will need to use?
But what if something goes wrong? Do you know how to fix it? If you don’t understand the ins and outs of your system (and are afraid to learn), then how will you react to a hum or squeal being introduced into the system? People will look to you to fix it, and if you don’t know how, then what? That’s why you need Audio Mixing 101, to help you know what you don’t know, and don’t be afraid to ask for help!
