3. Musicians and instruments
Mixing the same musicians in a different venue is good because you know how they should sound. What happens when it’s a different band or different pastor? I’ve mixed a number of weddings so I’m working with different pastors. Then if you’re guest mixing for a service or helping with a mix evaluation, it’s a whole new ballgame.
This is just talking about their general sound. Then you’ve got issues such as a guitarist who doesn’t know how to set a good amp tone or bands that are used to too much volume from their monitors. These make a huge impact in mixing.
How to mix in a different venue
1. Start on the stage.
This is the source of sounds, so know what you’ve got. Not only should you spend time on stage, setting up microphones for proper placement, you should know what microphones are in use. Also, you might find a problem like a condenser used where a dynamic would be better, or vice-versa. Also, check the microphones for pad switches and polarity switches. Are they set correctly? When you end up behind the mixer and notice an instrument doesn’t sound right, you’ll be at the place where the correction is done via the mixer.
2. Create a rough mix by cleaning up sounds.
If you’re lucky, the moment the band starts their practice, an amazing sound will emanate from the speakers. Most likely, you’ll need to build the mix from scratch. Start by setting the gains, enabling high-pass filters where warranted and then doing the clean-up work.
- Check out this link for cleaning up vocals.
Clean-up is about rolling off excess and removing offending frequencies. It’s also a good time to add in drum mic gating and a bit of compression on vocals. At this point, it’s like getting the channel inputs ready for the real mixing, and you can’t do that until you’ve done a bit of sanding.
3. Listen.
I can’t state this enough: Listen. Listen for the amount of reverb in the room. Listen to how each instrument and vocal sounds together. Walk the room to hear how the rough mix sounds in all parts of the room. Take an SPL meter to check for volume differences throughout the room.
If you’re at a small venue, they may use speakers on stands; ask for permission to turn the speakers if that would produce a better sound with more even coverage.
4. Mix for the room, the band and the mix needs.
At this point, the stage is set, a rough mix is dialed in and you know how it sounds throughout the room. Now perform the in-depth mix work. And this is where you might find yourself in a sticky situation. I know, I’ve been through it.
In most cases, you’re left to do your job. In some cases, you’ll find a critic in the room. Consider them a friend, not a foe. They’ll be waiting to say something. The person is likely to know the sound they typically hear in the venue. They are listening to hear if you can match it. Once you think you’re done, ask them for a review.
You might have created a superior mix and they’ll say something like, “It normally doesn’t sound this good.” Or, they’ll say it sounds like it normally sounds. Or, they’ll say it’s not what they are used to hearing and it’s here where you ask questions.
Questions include:
- What needs to be added?
- What needs to be changed?
- Could you get me a cup of coffee?
I joke with that last question, but let’s be honest, some people don’t know good sound when they hear it. But for the sake of this discussion, let’s assume they do.
You might hear replies like, “There needs to be more bass,” or “It doesn’t sound right when I stand here.” They might say, “Our church doesn’t run electric guitars that loud.”
Time to make some hard decisions. You need to consider their opinion, weigh it against your own knowledge of audio production, and consider it in light of your job. For example, if it’s a 70-year-old man who says there’s too much of the electric guitars, but the event is for a youth event where kids are known to listen to contemporary music, then you can discard his comment. But if you are guest mixing a service, such as filling in for a friend, then you need to mix for their expectations and not your own personal preferences.
The Take Away
The key to creating a good mix in any venue is treating it for what it is: a unique space. Be it a youth room, a sanctuary, a conference room or a gymnasium, each space is different and each need is different. Go into it with that mindset and you’ll do great.
